상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
학술저널

[연구논문] 난방기용 콘형 가스버너에서 3차원 난류 유동장 고찰-난류특성치에 대하여-

Investigation of the Three-dimensional Turbulent Flow Fields in Cone Type Gas Burner for Furnace-On the Turbulent Characteristics-

  • 21
커버이미지 없음

This paper represents the turbulent intensity, the turbulent kinetic energy and Reynolds shear stress in the X-Y plane of cone type swirl gas burner measured by using X -probe from the hot-wire anemometer system. The experiment is carried out at flowrate 350 and 450 ℓ/min respectively in the test section of subsonic wind tunnel. The turbulent intensity and the turbulent kinetic energy show that the maximum value is formed in the narrow slits distributed radially on the edge of a cone type swirl burner, hence, the combustion reaction is anticipated to occur actively near this region. And the turbulent intensities v and w are disappeared faster than the turbulent intensity u due to the inclined flow velocity ejecting from the swirl vanes of a cone type baffle plate of burner. Moreover, the Reynolds shear stress ω is distributed about three times as large as the Reynolds shear stress ω in the outer region of the cone type gas burner.

Abstract

1. 서론

2. Cone형 스월 버너의 구조

3. 실험장치 및 실험방법

4. 실험결과 및 고찰

5. 결론

후기

참고문헌

(0)

(0)

로딩중