IKONOS 위성영상의 외부표정요소로부터 정합선 수립에 의한 DEM 생성
DEM Generation by the Matching Line Using Exterior Orientation Parameters of the IKONOS Geo Imagery
- 한국측량학회
- 한국측량학회지
- 한국측량학회지 제24권 제4호
-
2006.10367 - 376 (10 pages)
- 26

본 연구는 IKONOS 위성영상의 메타자료와 지상기준점으로부터 라인변화에 따른 외부표정요소의 최적 다항식 모델을 결정하였다. 외부표정요소의 위치요소는 일차다항식, 회전요소는 상수항을 최적 다항식으로 결정하였다. 그리고 결정된 외부표정요소의 위치결정 정확도는 기존의 검증된 방법 즉, 최소제곱법에 의한 RPC 편의보정 방법과 비교하였다, 그 결과, 두 방법에 의한 정확도는 거의 차이가 없었다. 결정된 외부표정요소로부터 정합선을 수립한 후, 수치표고모델을 작성하여, RPC 편의보정 방법이 적용된 ERDAS IMAGINE에 의한 DEM과 비교 검토하였다. 그 결과로써, 제안방법과 ERDAS IMAGINE으로 작성한 수치표고모델의 높이차이는 허용 표준편차 범위 내에 존재하였다. 따라서 본 연구에서 제작한 수치표고모델은 기존의 검증된 방법과 유사한 결과 정확도를 나타냈다.
This study determines the optimum polynomial of exterior orientation parameters(EOPs) as a function of line number of linear array scanner. To estimate priori EOPs, meta data of IKONOS scene and ground control points are used. We select a first order polynomial and a constant for position elements modeling and rotation elements modeling. Positioning accuracy of the determined EOPs is compared with that of RPCs bias-corrected by the least squares adjustment. There is almost no difference between accuracies of the two methods. To obtain digital elevation model(DEM), matching line is established by the EOPs. The DEM is compared with DEM generated by ERDAS IMAGINE software, which utilizes the bias-corrected RPCs. Height differences of DEMs by the two methods are ranged within a allowable standard deviation. The produced DEM, therefore, shows accuracy similar to the verified method.
(0)
(0)