동축 파이프 이음부의 레이저용접 공정변수에 관한 연구
Study on the Process Parameters for Laser Welding of Coaxial Circular Pipe Inner Flange
- 한국레이저가공학회
- 한국레이저가공학회지
- 한국레이저가공학회지 제12권 제3호
-
2009.0914 - 17 (4 pages)
- 61

The laser welding was performed for the flange joint of two overlapped coaxial circular pipes which serve as the inlet and connector pipes of STS 316L. The laser welding test finally resulted in a good penetration depth of 1.8 to 2.0mm. On the way to get the good welding quality, two important parameters were found to be optimized. One is the focal positioning which is the offset of the laser beam focus to the exact welding seam line, which is more critical in the inner flange laser welding. When the beam spot size was deviated more than 200㎛ from the seam line, welding of two pipes is failed. The other is a gap size since a certain amount of gap is inevitable due to fabrication tolerance, or artificial allowances for smooth insertion of a pipe. However, it is required to restrict the gap allowance within 0.2mm to avoid undesirable undercut on a welding bead.
(0)
(0)