학술저널
UV 레이저를 이용한 폴리이미드 표면 개질에 관한 연구
Polyimide Surface Modification using UV Laser
- 한국레이저가공학회
- 한국레이저가공학회지
- 한국레이저가공학회지 제13권 제3호
-
2010.0913 - 18 (6 pages)
- 267

In this paper, polyimide (PI) surface was modified by UV Laser with a low laser fluence and investigated changes of surface geometry and chemical characteristics by SEM (scanning electron microscope), X-ray diffraction (XRD), XPS (x-ray photoelectron spectroscopy) and the measurements of contact angle of water. PI surface was peeled off and modified with microstructure fabrications by photochemical ablation over the laser fluence of 50 mJ/cm2. As laser fluence increased, delamination of PI surface was occurred largely and strongly. In chemical characteristics, the O/C and N/C atomic ratios increased and contact angle decreased from 80° to 40°.
1. 서 론
2. 실 험
3. 결과 및 고찰
4. 결 론
후 기
참고문헌
(0)
(0)