본 논문에서는 IMT-2000 기지국용 30 W 전력증폭기를 구현하고 전파흡수체를 사용하여 발전과 상호간섭에 의한 신호의 왜곡을 제거하므로써 이득평탄도 및 상호 변조 왜곡을 개선하였다. 사용된 전파흡수체의 흡수능은 3.6 ㎓ 대역에서 -10㏈ 이하, 2.3 ㎓ 대역에서 -4 ㏈ 이하가 측정되었다. 기존의 전력증폭기의 특성을 측정한 결과 이득은 57.37 ㏈(측정시 40 ㏈ 감쇠기 부가) 이상, 이득평탄도는 ±0.33 ㏈ 였으며, 출력의 세기가 33.3 W 일 때 IMD 특성은 27 ㏈c로 나타났다. 한편 전력증폭기의 최종단인 고출력 전력결합기 부분에 전파흡수체를 부착한 후의 이득은 약 58.43 ㏈(측정시 40 ㏈ 감쇠기 부가) 이상, 이득평탄도는 ±0.0935 ㏈가 나타났으며, 출력이 33.3 W 일때 3차 IMD 성분은 약 29 ㏈c였다. 측정 결과 전파흡수체를 사용하였을 경우와 사용하지 않았을 경우 이득은 1 ㏈, 이득평탄도는 0.3 ㏈, IMD 특성은 1.77 ㏈c가 각각 개선됨을 확인하였다.
In this paper, the 30 W power amplifier for an IMT-2000 repeater was developed a gain flatness and the third IMD (Intermodulation distortion) by microwave absorber. The absorption ability of the absorber is shown up to -10 ㏈ and -4 ㏈ at 3.6 ㎓, 2.3 ㎓ band, respectively. The power amplifier without absorber has the gain over 57 ㏈, the gain flatness of ±0.33 ㏈ and the third IMD of 27 ㏈c at 33.3 W output. Otherwise, the power amplifier with absorber has the gain over 58㏈, the gain flatness of less than ±0.9, the third IMD over 29 ㏈c at the same output power. As a result, the characteristic of the different type shows improvement of 1 ㏈ in gain, 0.3 ㏈ in gain flatness and 1.77 ㏈c in IMD.
요약
Abstract
1. 서론
2. 발진의 발생 요인
3. 전파흡수체 특성
4. 전력증폭기의 이득 및 IMD 특성 측정 방법
5. 전력증폭기 특성
6. 흡수체를 사용한 전력증폭기의 특성
7. 결론
후사
참고문헌
(0)
(0)