상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
학술저널

평강판 용접시 용접조건에 따른 각변형에 대한 연구

A Study on the Angular Distortion with Welding Condition of Welding Plate

  • 0
137165.jpg

It is important for us to gain further Knowledge concerning on the several deformation with welding condition of weld structures. Weld shrinkage is due to complex action with many factors, may theoritical or semi-empirical equations about weld shrinkage have been applied with limitatlon because of the problem of precision as well as much difficulties In practical field application. The deformation of the several shrinkage for the butt joint CO2 gas arc welding of plates is investigated in this paper. The facts revealed in this study are as follows. Weld heat input is propertional to the butt Joint welding. The angular distortion in butt joint welding of the t6 plate is about 0.86°, and the t9 plate is about 1.05°. The angular distortion at a near by welding line(with 20-30mm welding line) has been a curve of few shrinkage, and more than with in 30mm welding 1ine were to change by straight. With the restraint angular distortion was reduced from 5% to 15% that of free Joint.

Ⅰ. 서 론

Ⅱ. 실험장치 및 방법

Ⅲ. 실험결과 및 고찰

Ⅳ. 결 론

(0)

(0)

로딩중