
비다공성 표면의 젖은 검체에서 Small particle reagent (SPR)과 Nano SPR로 현출한 신선한 지문의 감도 비교:
방화 테러 현장에서 발견되는 젖은 검체를 대상으로
- 이다솜(Lee Da Som) 황윤정(Hwang Yun Jung) 최고운(Choi Go Woon) 김민석(Kim Min Seok) 유제설(Yu Je Seol)
- 한국테러학회
- 한국테러학회보
- 제11권 제2호
- 등재여부 : KCI등재
- 2018.06
- 140 - 158 (19 pages)
본 연구에서는 비다공성 표면의 젖은 검체에 남겨진 신선한 지문을 small particle reagent (SPR)과 Nano SPR로 처리하여 현출한 지문의 감도를 비교하였다. SPR은 보통 악천후의 야외 상황에서 옮길 수 없는 비다공성 표면의 검체에 분말법을 대신해서 사용할 수 있다. 하지만 비다공성 표면에 남겨진 신선한 지문은 표면에 거의 흡수되지 않기 때문에 외력에 의해 쉽게 훼손될 수 있고, 분말의 입자와 성분에 따라서 현출한 지문의 상태는 상이하기 때문에 적절한 현출기법이 적용되어야 하는 어려움이 있다. 다양한 비다공성 표면의 검체 (PS, 스테인리스 강, 유리, 타일)에 손상되기 쉬운 신선한 지문을 남긴 후 물에 적셨으며, 이를 SPR과 Nano SPR로 각각 처리하였다. 그 결과 대부분의 검체에서 Nano SPR을 사용하여 현출한 지문의 평가점수가 우수하였다. 따라서 비다공성 표면의 젖은 검체에 남겨진 신선한 지문을 현출한다면 Nano SPR이 보다 효과적일 것으로 사료된다. 다만 젖은 PS 표면에서 지문을 현출하는 상황에서는 액상분말기법이 적절하지 않기 때문에 다른 방법을 고려해야 한다.
In this study, fresh fingerprints left on wet specimens of non-porous surface were treated with small particle reagent (SPR) and Nano SPR to compare the sensitivity of fingerprints. SPR can be used in place of the powder method on specimens of non-porous surfaces that can not be transported under normal outdoor weather conditions. However, since fresh fingerprints left on the non-porous surface are hardly absorbed on the surface, the fingerprints can be easily damaged by phisical external force, and since the states of the fingerprints are different according to the particles, so that it is difficult to apply appropriate development techniques. Fresh fingerprints that were deposited on various non-porous surfaces (PS, stainless steel, glass, and tile) were left in the water and treated with SPR and Nano SPR respectively. As a result, most samples show a relatively high sensitivity of the fingerprints that came from using Nano SPR, and when the fingerprints were observed, the powder particles are relatively closely packed and visually observed easily. However, it is recommended to use other methods such as powder method or CA method rather than SPR or Nano SPR method in case of fingerprints on wet PS surface.
Ⅰ. 서론
Ⅱ. 실험 재료
Ⅲ. 실험 방법
Ⅳ. 연구 및 고찰
Ⅴ. 결론