상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
146193.jpg
KCI등재 학술저널

마이크로스트립 선로를 이용한 삼중대역 WLAN 안테나의 설계 및 제작

Design and Implementation of Triple-band WLAN Antenna with Microstrip Lines

  • 31

본 논문에서는 마이크로스트립 선로를 이용하여 WLAN 시스템에 적용 가능한 삼중대역 안테나를 설계, 제작 및 측정하였다. 제안된 안테나는 두 개의 선로와 접지면에 슬릿을 갖도록 설계하여 삼중대역 특성을 갖도록 하였다. L3, L10, 그리고 슬릿 파라미터에 대한 조정을 위해 시뮬레이션을 수행하였으며 요구되는 주파수 대역과 대역폭을 만족하도록 제안된 모델의 각 파라미터 값들을 조정하였다. 제안된 안테나는 32.0 mm⨯44.0 mm× 1.0mm의 크기로 유전율 4.4인 FR-4 기판 위에 설계 및 제작되었다. 제작 및 측정결과로부터, 120 MHz (890 MHz∼1.01 MHz), 440 MHz (2.35∼2.79 GHz), 그리고 1,280 MHz (5.07∼6.35 GHz)의 대역폭을 얻었다. 또한 요구되는 주파수 대역에서 측정된 이득과 방사패턴 특성을 나타내었다.

In this paper, a microstrip-fed triple-band antenna for WLAN system with microstrip lines was designed, fabricated and measured. The proposed antenna is composed of two strip lines and slit in the ground plane and then designed in order to get triple band characteristics. We carried out simulation on L3, L10, and slit parameters, and adjusted the parameters of the proposed antenna to satisfy the required frequency band and bandwidth. The proposed antenna is made of 32.0 × 44.0 × 1.0 mm and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shows that the proposed antenna obtained the -10 dB impedance bandwidth 120 MHz (890 MHz∼1.01 MHz), 440 MHz (2.35∼2.79 GHz), and 1,280 MHz (5.07∼6.35 GHz) covering the triple WLAN bands. Also, the measured gain and radiation patterns characteristics of the proposed antenna are presented at required frequency band, respectively.

Ⅰ. 서 론

Ⅱ. 설계 및 제작

Ⅲ. 측정결과 및 검토

Ⅳ. 결론