측벽형 스프링클러 헤드 디플렉터의 성헝후처리에 따른 부식특성에 관한 연구
A Study on the Corrosion According to Post-Forming Treatment of a Horizontal Side Wall Sprinkler Head Deflector
- 민인홍 전동일 김형종 박종연
- 한국화재소방학회
- 한국화재소방학회논문지
- Vol.16 No.1
- 등재여부 : KCI등재
- 2002.03
- 77 - 83 (7 pages)
본 연구의 목적은 UL(미국보험협회)에 규정된 암모니아 대기상태에서 측벽형 스프링클러 헤드 디플렉터의 응력부식균열을 막기 위한 방안을 제시하는 것이다. 성형 후처리로서 성형제품 그대로와 샌드블래스팅 처리한 것, 그리고 풀림 열처리를 한 것 등 3가지에 대하여 부식시험을 실시하였다. 금속현미경으로 시편을 관측한 결과 잔류응력이 부식균열을 일으키는 주요원인이며, 극심한 부식조건에서 발생할 수 있는 잔류응력을 적절한 열처리를 통해 제거하거나 감소시킬 수 있어 파손을 방지할 수 있다는 것을 확인 하였다.
The objective of this study is to propose a method to prevent the possible stress corrosion cracking of a horizontal side-wall sprinkler head deflector in the same atmosphere of ammonia gas as it regulated in the UL (Underwriters Laboratory). A corrosion test is carried out for three types of specimen according to post-forming treatment, one of which is annealing, another sand blasting and the other no treatment. The observation of the test specimens with a metal micro-scope says that the tensile residual stress is a major factor causing corrosion cracking, and that a proper heat treatment can remove or reduce the residial stress and prevent a crack from occurring even in a severe corrosive atmosphers.