건축용 내화강재(FR 490) 적용 H형강 보부재의 고온내력 연구
Study of Structural Stability for H-section Beams Made of Fire Resistant Steels (FR 490) at High Temperatures by Analytical Method
- 권인규(Kwon, In-Kyu)
- 한국화재소방학회
- 한국화재소방학회논문지
- Vol.28 No.5
- 등재여부 : KCI등재
- 2014.10
- 52 - 57 (6 pages)
구조용 강재는 고온 시 물질 내부의 구성 물질의 결합력 약화로 인하여 내력과 변형이 추가적으로 발생됨으로써, 구조적 성능이 저하되고, 국부 및 연속적 붕괴로 이어질 수 있다. 따라서 강재로 구성된 구조부재는 화재 시 열영향부를 최소화하기 위한 수단이 강구되는 내화설계가 요구된다. 건축용 내화강재(FR 490)는 용접 구조용 강재(SM 490)와 상온시 특성은 동일하나, 고온 시의 내력유지 성능이 우수한 강종으로써 이로 구성된 보부재의 고온 시 내력 평가 자료는 거의 없다. 따라서 본 연구에서는 FR 490강재로 구성된 보부재의 고온 시 거동을 고온 시 재료 특성과 이론적 방법을 통하여 해석적으로 평가하고, 이를 SM 490강재보와 비교함으로써 내화성능을 확인하고자 하였으며, 그 결과 FR 490강재보의 경우 SM 490강재보에 비해서 고온 시 내력유지 성능이 우수하였다.
When structural elements of steel framed structures are exposed to fire situations, the structural stability begins to decrease due to dislocation of substantial. The increase of the beam length causes an additional stress and deflection. These can be serious factors to cause a severe failure of structures. To improve the fire resistance of beams, prevention of the heat from a fire by coating with fire protection material is essential for beams. The FR 490 was developed to enhance fire resistance compared with SM 490 steel. However, the fire resistance of FR 490 H-beams has not been evaluated by analysis method since it was developed. In this paper, materials properties in high temperature and a heat transfer and thermal stress theory were used in the evaluation of the fire resistance of FR490 H-beams. The fire resistance of FR490 steel beams was compared with that of SM490 beams. The comparison verified that the structural stability of FR490 beams at high temperature was superior to that of SM490 beams.