상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
148335.jpg
KCI등재 학술저널

TiAIN 코팅 엔드밀공구 R-Curve 가공시 절삭력이 공구에 미치는 영향

The Effect of the Cutting Force on Tool in R-Curve Machining of End-Mill Tool Coated TiAIN

  • 5

It is the required of high precision and high efficiency machining process for most of the mechanical and electronic parts along with the rapid development of modern industry. Necessity of efficient R-curve processing is rising in the machine and parts industry of electronics industry and troy industry field. In machining experimentation the results of R-curve, When spindle speed 25,000 rpm and feed rate 2,000mm/min and depth of cut 0.lmm, it was shown the best result as surface roughness. also, When R-curve machining, it is analyzed that it is affected in tool wear in increase of spindle speed and Cutting force and depth of cut.

ABSTRACT

Ⅰ. 서론

Ⅱ. 실험계획법의 기초

Ⅲ. 실험장치 및 실험 방법

Ⅳ. 실험결과 및 고찰

Ⅴ. 결론

참고문헌

로딩중