상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
151324.jpg
KCI등재 학술저널

우분뇨와 폐잔디의 단독 및 병합소화 잠재량 평가

Biogas potential estimation for mono- and co-digestion of cow manure and waste grass

  • 38

본 연구에서는 우분뇨와 폐잔디를 이용한 혐기소화 잠재성을 단독 및 병합 조건에서 평가하였다. 두 종의 유기성 폐자원은 휘발성고형분(VS) 기준 100:0, 75:25, 50:50, 25:75, 0:100의 다섯 가지 혼합비 조건에서 회분식 BMP(biochemical methane potential) 테스트를 통해 바이오가스 생산을 측정하였다. 또한, 서로 다른 3개의 온도조건(25℃, 30℃, 35℃)을 적용하여 총 15개 실험 조건을 비교하였다. 실험 결과, 반응 온도가 높을수록, 폐잔디의 혼합비가 높을수록 더 높은 메탄 수율과 최대 메탄 생산율이 관측되었다. 실험 결과를 바탕으로 유효체적 240(농장 규모) 또는 2,400(마을 규모) ㎥의 가상의 혐기소화조를 가정하여 서로 다른 조건에 따른 에너지 수지를 비교하였다. 예측된 에너지 생산량은 반응 온도가 높을수록 더 많았으나 소화조 가온 등에 따른 에너지 소모량을 고려한 에너지 순생산량은 30℃, 35℃, 25℃ 순으로 높게 예측되었다. 따라서 에너지 순생산량을 최대화하기 위한 조건 도출을 위해서는 메탄 수율 등의 실험적 측정 외에도 구체적인 소화조의 설계 인자를 고려해야 하는 것으로 평가되었다.

Biogas production potential was experimentally estimated for mono- and co-digestion of cow manure and waste grass. The two organic wastes were mixed at five different ratios (100:0, 75:25, 50:50, 25:75, 0:100) on the volatile solids basis, and were assessed using biochemical methane potential (BMP) test. Thee reaction temperatures, 25℃, 30℃ and 35℃, were applied as well, resulting in 15 different combinations for the test. The results showed that both higher temperature and waste grass mixing ratio resulted in higher methane yield and maximum methane production rate. Based on the experimental results, a theoretical farm- or community-scale (240 or 2400 ㎥) anaerobic digester was designed to evaluate the energy balance associated with mono- and co-digestion of the wastes at different temperatures. Although the energy production increased as the temperature and the waste grass mixing ratio increased, the net energy gain, energy production subtracted by energy consumption for heating and maintenance, was estimated to be the highest at 30℃, followed by at 35℃ and 25℃. Therefore, it is advised that both the experimental methane production and the detailed design parameters must be considered for the optimization of the net energy gain from these wastes.

1. 서 론

2. 재료 및 방법

3. 결과 및 고찰

4. 결 론

사 사

References

로딩중