상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
153179.jpg
KCI등재 학술저널

화재감지기의 응답특성 평가를 위한 Shield-cup이 적용된 시험방법

Test Method Using Shield-cup for Evaluating Response Characteristics of Fire Detectors

  • 27

성능위주 화재안전설계에서 요구 피난시간(Required safe egress time, RSET)의 정확한 평가를 위해서는 화재감지기 작동시간에 대한 정확한 예측이 필수적으로 요구된다. 본 연구에서는 실험 및 수치해석을 통해 화재감지기의 작동시험에 널리 적용되고 있는 Plunge test의 문제점이 검토되었다. 또한 이를 개선시킬 수 있는 새로운 Shield-cup test가 제안되었다. 측정의 정확성 및 재현성 확보를 위하여 개발된 Fire detector evaluator (FDE)가 적용되었다. 주요 결과로서, Plunge test에서는 감지기가 투입되는 순간에 급격한 유동변화로 인하여 연기감지기의 작동시간에 큰 측정오차가 발생되었으며, Shield-cup test에서는 감지기 노출 과정에서 장치 내부의 유동 변화가 거의 확인되지 않았다. 결론적으로 Shield-cup test는 모사된 화재환경에서 화재감지기의 응답특성을 보다 정확히 평가하는데 상당히 유용할 것으로 기대된다.

It is necessary to predict the activation time of fire detectors accurately to improve the reliability for evaluating therequired safe egress time (RSET) in performance-based fire safety design. In this study, problems of the plunge test, whichis widely applied in assessing fire detectors, were examined through experiments and numerical simulations. In addition,a new shield-cup test method was proposed to address these problems. A fire detector evaluator (FDE) developed in aprevious study was applied to ensure measurement accuracy and reproducibility. During the plunge tests, a significantmeasurement error was observed in the activation time of the smoke detector because of the rapid flow change when thedetector was input. However, during the shield-cup tests, slight changes occurred in the flow inside the FDE when thedetector as exposed to smoke. In conclusion, the proposed shield-cup test method is expected to be useful for evaluatingthe response characteristics of fire detectors more accurately in simulated fire environments.

1. 서 론

2. 연구방법

3. 결과 및 고찰

4. 결 론

References