Comparison of Radiation Dose of Abdomen Pelvis CT with Automatic Exposure Control according to Different Scout Image Acquisition: Standard and Obese Phantom Study
Scout 획득 조건 변화에 따른 Automatic Exposure Control을 사용한 복부 CT의 방사선량 비교: 표준 및 비만 팬텀 연구
- 대한CT영상기술학회
- 대한CT영상기술학회지
- 대한CT영상기술학회지 제23권 제2호
-
2021.091 - 8 (8 pages)
-
DOI : 10.31320/JKSCT.2021.23.2.1
- 18
자동노출조절장치를 사용한 복부 CT 검사에서 scout 영상을 획득 시 관전압, 관전류를 변화시켰을 때 실제 검사의 선량 측면에 어떤 영향이 있는지 보고자 하였다. 연구는 G사, S사 두 사의 장비와 standard body phantom, obese body phantom을 사용하여 진행이 되었다. Scout 영상을 획득 시 관전압은 80, 100, 120 kVp, 관전류는 10 ~ 80 mA를 이용하여 적용하였다. 선량 분석은 먼저 복부 CT검사에 AEC 기능이 잘 적용되는지 알아보았고, 팬텀의 단면에 흡수된 선량을 mAs 값으로 그리고 전체 CT 선량 수치도 비교하였다. 그 결과 G사, S사 장비를 이용하여 scout 영상의 획득 시 관전류의 변화는 실제 CT 검사에서 크게 영향을 미치지 않았다. 반면에, 관전압을 변화시킬 때에는 scout 획득 관전압이 낮을수록 실제 CT 검사 시 선량이 증가되는 것을 확인할 수 있었다. 장비를 사용할 때 전체 CT검사의 선량을 줄이기 위해 scout 획득 관전압을 무조건 낮게 설정하여 영상을 획득한다면 실제 CT검사에서 더 많은 선량이 발생하는 것을 초래할 가능성이 있다. 결과적으로 scout 영상 획득 시 관전압의 사용은 실제 CT 검사의 관전압과 가능한 일치시켜야 한다.
Automatic Exposure Control(AEC) is usually utilized in Abdomen Pelvis CT(APCT) according to attenuation profiles of patient’s body. Here, it is very imperative to acquire an ideal scout image. There were a lot of research which dealt with the relationship between scout scan and AEC function. However, most studies had done fewer parameters in scout image based on a standard body size. So, we acquired the various scout images with lots of parameters such as tube voltages(80, 100, 120 kVp) and tube currents(from 10 to 80 mA) using two different size of phantoms and two manufacturers. APCT scans underwent from liver to anus portion. The dose distributions of all axial APCT images and mAs at specific portions were measured and compared. As a result, there were no significant differences of radiation dose according to all different tube currents. However, dose change had occurred at different tube voltages. In conclusion, it is very important to use same tube voltage at the scout and the APCT. Lastly, we recommend that small amount of mA should be utilized at scout scan.
I. INTRODUCTION
II. MATERIAL AND METHODS
III. RESULT
IV. DISCUSSION
V. CONCLUSIONS
(0)
(0)