상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
커버이미지 없음
KCI등재 학술저널

수가공 및 기계가공 된 나비장 접합부의 성능 비교

Performance Comparison of Butterfly Joints between Manual Member and Pre-cut Member

To modularize the joints of Hanok, the bending strengths of butterfly joints between pre-cut and manual member were compared. Structural size joints were manufactured and the length, width and thickness of each tenon were produced with different sizes. The ultimate load of pre-cut members was 2 times higher than that of manual members. Degree of anchorage for the joints on pre-cut member was also superior to that of manual member. By the F-test results, a great influence between ultimate load and sizes of tenon was found. In result of multiple re-gression analysis, the length and thickness of tenon were showed proportion relationships with the ultimate load, but the width of tenon was showed inverse proportion with the ultimate load. The results of this study can be used to identify the relationships among the major influ-ence factors. Futhermore, it might be used as basic data for modularization the joints of Hanok.

Ⅰ. 서론

Ⅱ. 재료 및 방법

Ⅲ. 결과 및 고찰

Ⅳ. 결론

사사

참고문헌

로딩중