상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
커버이미지 없음
KCI등재 학술저널

가열·재색변환처리 목재를 이용한 생활용품개발에 관한 연구

A study on the development of living products using heat and color conversion treated woods

This study was carried out to investigate the physical and mechanical properties of 6 hardwoods before and after heat treatment in an effort to produce the high quality industrial lumber product. The results were as follows. Specific gravities of green woods were in range from 0.90 to 1.10. The specific gravities of never treated woods showed higher than those of the heat treated woods. The shrinkage of heat treated woods when green to air & oven dry was significantly low, compared to never treated woods. The compression strengths parallel to grain of heat treated woods showed higher than those of never treated woods. The moduli of rupture (MOR) of never treated and heat treated woods were 176.4N/㎟∼102.8N/㎟ and 100.1N/㎟∼61.2N/㎟ respectively. MORs of heat treated woods showed lower than those of never treated woods. There was no significant change in the modulus of elasticity (MOE) before and after heat treatment.

Ⅰ. 서론

Ⅱ. 재료 및 방법

Ⅲ. 결과 및 고찰

Ⅳ. 결론

Ⅴ. 생활용품 개발

참고문헌

로딩중