상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
162056.jpg
KCI등재 학술저널

家具用 部材의 曲加工 特性

Bending Processing Properties for Parts of Furniture: I . Solid Wood-Bending of Larch Wood by Boiling Treatment

This study was performed to investigate the solid wood bending properties of larch wood (Larix lep- tolepis Gord.) grown in Korea by boiling treatment. The specimens were green and their dimension was l5x l5x350mm. The optimum conditions for solid wood bending processing of larch wood are showed in Table 5 and the minimum solid-bending radius was 280mm in boiling treatment. The effect of pin knots, resin pockets, and torn grains on the concave side of bent wood on the degradation of bending processing properties were very severe and their bending failures were 90%, 95%, and 50%. respectively, when bent to a 300mm radius.

1. 緖論

2. 材料 및 實驗方法

3. 結果 및 考察

4. 結論

引用文獻

로딩중