복합조직을 응용한 도비디자인에 관한 연구

A Study on Dobby Design that Applies a Complex Weave Design

Fabric refers to a fabric in which warp (vertical thread) and weft (horizontal thread) cross at the right angles. Here, the warp is more twisted than the weft. The number of twists increases, the stronger it becomes. The fabric is glued on a warp, and is subjected to great tension in the shuttle loom machine. A lot of friction in the shuttle loom’s traffic is applied so that protective work is performed to strengthen it. The weft is thicker and less twisted than the warp. Therefore, its side is weaker than the warp’s side, but its elasticity is high. The width of the fabric is determined according to the loom machine. Hence, if it is large, the fabric can be produced broadly, and if it is small, the fabric can be produced narrowly. In general, it can be divided into small, medium, and large. The textile organization, which is the main pillar of the textile composition, started with the beginning of the industrial revolution and has been around for 400 years. However, compared to that long time, the reality of textile technology was that the basic weaves of the fabric have existed about 600 times. In this study, the number of textile weaves designs that will be induced and created into Dobby weave using complex weave is mathematically infinite. The size and diversity of designs are also increased to infinite areas. The applied dobby design, which is the result of this study, is primarily used as an organization that constitutes a fabric, and secondly, as a pattern for various industries. This is a revolutionary result of the history of textile weaving, and I am sure that it will be a pattern design necessary for all industries.