Sn-58Bi Solder와 OSP 표면 처리된 PCB의 접합강도에 미치는 시효처리와 에폭시의 영향

Effect of Aging treatment and Epoxy on Bonding Strength of Sn-58Bi solder and OSP-finished PCB

다양한 무연솔더합금 가운데 Sn-58Bi solder는 저융점이며 상대적으로 높은 인장강도를 갖고 있지만 취성적이라는 단점을 갖고 있다. 이러한 Sn-58Bi 솔더의 기계적 강도를 보완하기 위해 epoxy를 함유한 Sn-58Bi 솔더가 연구되어져왔다. 본 연구는 Sn-58Bi 솔더와 Sn-58Bi 에폭시 복합솔더를 이용하여 PCB 기판에 접합한 후, 시효처리에 따른 솔더/기판 계면 미세구조와 기계적 특성변화를 연구하였다. OSP 표면처리된 PCB 기판에 솔더볼을 형성 한 후 85, 95, 105, 115℃에서 100~1000 시간동안 시효처리하였으며, 기계적 특성평가로 저속전단시험을 진행하였다. 시효 처리 시간 및 온도의 증가에 따라 Cu₆Sn₅ 금속간화합물층은 성장하였으며 Sn-58Bi 솔더 금속간화합물층이 Sn-58Bi 에폭시 복합솔더보다 두꺼웠다. 전단시험 결과, Sn-58Bi 에폭시 복합솔더가 Sn-58Bi 솔더보다 약 2배 높은 전단강도 값을 나타냈으며 시효시간이 증가할수록 전단강도 값은 감소하였다.

Among various lead-free solders, the Sn-58Bi solders have been considered as a highly promising lead-free solders because of its low melting temperature and high tensile strength. However, Sn-58Bi solder has the poor ductility. To enhance the mechanical property of Sn-58Bi solder, epoxy-enhanced Sn-58Bi solders have been studied. This study compared the microstructures and the mechanical properties of Sn-58Bi solder and Sn-58Bi epoxy solder with aging treatment. The solders ball were formed on the printed circuit board (PCB) with organic solderability preservative (OSP) surface finish, and then the joints were aged at 85, 95, 105 and 115℃ for up to 100, 300, 500 and 1000 hours. The shear test was conducted to evaluate the mechanical property of the solder joints. Cu₆Sn₅ intermetallic compound (IMC) layer grew with increasing aging time and temperature. The IMC layer for the Sn-58Bi epoxy solder was thicker than that for the Sn-58Bi solder. According to result of shear test, the shear strength of Sn-58Bi epoxy solder was higher than that of Sn-58Bi solder and the shear strength decreased with increasing aging time.