Magnetic soft mold를 이용한 나노 와이어 그리드 편광 필름 연구
A study on the Nano Wire Grid Polarizer Film by Magnetic Soft Mold
- 한국마이크로전자및패키징학회
- 마이크로전자 및 패키징학회지
- 제21권 제2호
- : KCI등재후보
- 2014.06
- 85 - 89 (5 pages)
본 연구에서는 자기 소프트 몰드를 이용하여 피치 143.59 nm의 고 성능 NWGP(Nano Wire Grid Polarizer) 필름의 새로운 제조 방법을 제안하였다. 제작된 편광필름은 6cm×6cm의 PET기판위에 알루미늄 격자 구조를 가지고 있으며, 이는 TFT-LCD(Thin Flat Transistor Liquid Crystal Display)에 응용 가능할 것으로 보인다. 자기 소프트 몰드는 너비 70.39 nm의 규격으로 제작되었으며, 이를 이용하여 2단계의 복제과정을 거쳐 제작되어진다. 이를 통해 본 연구에서는 기판위에 75.68 nm 선폭과 64.76 nm의 높이 143.59 nm pitch를 가지는 격자구조의 NWGP 패턴을 제작하였다. 또한, 이는 800 nm 파장 영역 대에서 75%의 최대 투과율과 10%의 최소 투과율을 가지는 것을 확인하였다. 따라서, 본 공정을 통해 독창적인 저 비용의 나노패터닝 기술로 디스플레이 산업에서 적용되어 질 것으로 보여진다.
We propose the new fabrication method of a 70 nm half-pitch wire grid polarizer with high performance using magnetic soft mold. The device is a form of aluminium gratings on a PET(Polyethylene phthalate) substrate whose size of 3cm×3cm is compatible with a TFT_LCD(Tin Flat Transistor Liquid Crystal Display) panel. A magnetic soft mold with a pitch of 70 nm is fabricated using two-step replication method. As a result, we get a NWGP pattern which has 70.39 nm line width, 64.76 nm depth, 140.78 nm pitch, on substrate. The maximum and minimum transmittances of the NWGP at 800 nm are 75% and 10%, respectively. This work demonstrates a unique cost-effective solution for nanopatterning requirements in consumer electronics components.
1. 서론
2. 나노 와이어 그리드 편광필름용 Magnetic soft mold
3. 전자기력을 이용한 UV 나노 임프린트 공정
4. 나노 와이어 그리드 금속 격자 제작 및 특성 평가
5. 결론
감사의 글
References