평행 결합선로를 이용한 광대역 180° Bit X-대역 위상 변이기의 설계
Broadband 180° Bit X-band Phase Shifter Using Payallel-Coupled tines
- 한국마이크로전자및패키징학회
- 마이크로전자 및 패키징학회지
- 제12권 제2호
- : KCI등재후보
- 2005.06
- 175 - 179 (5 pages)
본 논문에서는 평행 결합선로를 이용하여 구조가 간단하고 광대역 특성을 갖는 180° bit X-대역 위상 변이기를 설계하고 마이크로머시닝 (micromachining) 공정을 이용하여 제작하였다. 이 위상 변이 기는 한쪽 끝이 접지된 90° 평행 결합선로와 한쪽 끝이 단락된 90° 평행 결합선로를 병렬로 연결한 구조를 갖는다. 이분법 이론에 의해 180° bit 위상 변이기에 대한설계 공식을 유도하고, 이를 적용하여 중심주파수 10GHz에서 대역폭 6GHz, ±5°의 위상 변이를 갖는 광대역 180° bit위상 변이기를 설계, 제작하였다.
A novel, simple and broadband 180° bit X-band phase shifter was proposed and fabricated in a standard micromachining process. It is composed of two 90° parallel-coupled lines; one of which is shorted and the other is grounded. Design equations for the proposed 180° bit phase shifter are derived by the method of even and odd mode analysis. Based on design equations, 180° bit phase shifter was designed and fabricated to operate from 7 to 13 GHz with ±5° of phase deviation.
1. 서론
2. Design
3. 결과 및 고찰
4. 결론
감사의 글
참고문헌