상세검색
최근 검색어 전체 삭제
다국어입력
즐겨찾기0
산업기술연구논문지 제29권 1호.jpg
KCI등재 학술저널

ABS 엔지니어링 플라스틱의 하향밀링 시 절삭조건이 표면거칠기에 미치는 영향

Effects of Cutting Conditions on Surface Roughness in Down-Milling of ABS Engineering Plastic

DOI : 10.29279/jitr.2024.29.1.27
  • 37

본 논문에서는 ABS 엔지니어링 플라스틱 가공에 최적의 절삭조건에 근거가 될 수 있는 표면거칠기의 연구를 진행하며 머시닝센터 장비를 활용하여 하향절삭 에서의 최적의 절삭조건 값을 제시하고자 한다. 이를 통해 현장에 서의 최적의 절삭조건을 제시하고자 하며 현장에서 절삭조건 설정을 위한 기초자료를 제시하고자 한다. 절삭조건은 문헌 근거하여 절삭속도와 이송에 대한 값을 대입하여 표면거칠기의 값을 비교하고 절삭깊이에 따른 표면거칠기도 비교함으로써 최적의 절삭조건 값을 제시하고자 한다.

In this study, we investigate surface roughness, which can serve as the basis for optimal cutting conditions for ABS engineering plastic processing, and propose optimal cutting conditions for down-cutting using machining center equipment. Accordingly, we aim to provide basic data for setting cutting conditions in the field. The cutting conditions are compared with the values of surface roughness by substituting the values for cutting speed and feed as given in a textbook. Optimal cutting condition values are suggested by comparing different levels of surface roughness based on machining depth.

Ⅰ. 서 론

Ⅱ. 실험장비 및 작업방법

Ⅲ. 실험결과 및 고찰

Ⅳ. 결 론

References

로딩중