
10 CMM RTO 시스템의 안전설계 및 유지보수작업을 위한 모바일서비스시뮬레이터 구현 - 10 CMM RTO 설계정보 기반의 모바일서비스시뮬레이터
Implementation of Mobile Service Simulator for Safety Design and Maintenance of 10 CMM RTO Systems : 10 CMM RTO Design Information-Based Mobile Service Simulator
- 사단법인 한국안전문화학회
- 안전문화연구
- 제34호
- 2024.09
- 1 - 17 (17 pages)
본 연구에서는 10 CMM 용량의 연소식 산화장치(RTO)를 설계하고, 안전한 설계 작업을 위하여 모바일 기반의 자동설계시뮬레이터 (Auto-design Simulator)를 구현한다. 자동설계시뮬레이터는 국제표준에 따른 RTO의 설계와 제작, 유지보수 활용에 목적을 두고 있다. RTO 설계 공식을 이용한 시뮬레이터는 모바일과 PC를 이용하고, 설계 우선순위와 설계규격에 대한 신속한 계산값을 얻도록 한다. 모바일 네트워크에서 설계자와 현장 엔지니어, 또는 설계자와 관리자 간에 서비스를 원활하게 하고, 우선 순위를 조건에 따라 최적한 구축을 실행하도록 지원한다. 주메뉴(Main Menu)로부터 로터리(Rotary) 선정과 설계, 몸체 설계용 기본 데이터 입력 및 관리, 세라믹 메뉴 선정과 계산, 퍼지(Purge) 직경 계산, 가스 입구 및 출구(Gas Inlet/Outlet) 직경 계산, 다양한 압력계산 등으로 프로그램을 구축한다. 10 CMM 설계를 위한 계산 절차와 프로그래밍을 통하여 설계 플랫폼을 표준화할 수 있고, 다양한 환경에서도 표준화된 시뮬레이터를 통하여 설계 및 제작의 효용성을 높일 수 있다. 특히 수동적인 방법을 떠나 표준화된 프로그램시뮬레이터를 통하여 RTO 장치의 PLC (Programmable Logic Controller) 제어반 자동화와 모니터링 관리는 물론, 시스템 설치 운영 시 자동세팅(Auto-setting) 운영에 중요한 역할을 지원할 수 있다. 향후 시뮬레이터는 RTO 고장의 원인과 대책을 수립하는데 직접 연관되며, PLC 매핑 인터페이스(Mapping Interface) 모니터링과 고장 원인 분석을 위한 트립 (Trip) 정보 대응에도 좋은 정보를 제공한다.
In this study, a 10 CMM capacity combustion type oxidizer (RTO) is designed and a mobile-based automatic design simulator is implemented for safe work design work. The automatic design simulator aims to design, manufacture, and utilize the RTO in accordance with international standards. The simulator using the RTO design formula uses mobile and PC and obtains quick calculations of design priorities and design specifications. It facilitates service between designers and field engineers, or designers and managers on a mobile network, and supports optimal deployment according to priorities. The program is constructed with rotary selection and design from the main menu, basic data input and management for body design, ceramic menu selection and calculation, purge diameter calculation, gas inlet/outlet diameter calculation, and various pressure calculations. The design platform can be standardized through calculation procedures and programming for 10 CMM design, and the effectiveness of design and production can be increased through standardized simulators in various environments. In particular, it can support the automation and monitoring of the PLC (Programming Logic Controller) control panel of the RTO device through a standardized program simulator, as well as an important role in the automatic setting operation of the system installation and operation. In the future, simulators are directly related to the establishment of the causes and countermeasures for RTO failure and provide good information for monitoring PLC mapping interface and responding to trip information for failure cause analysis.
Ⅰ. 서 론
Ⅱ. 100 CMM RTO 설계기반의 모바일시뮬레이터 구현
Ⅲ. 실험 결과
Ⅳ. 결 론
참고문헌